Brother International KE-436C Programmer Instruction Manual - English - Page 51
Move the work clamp with, when the needle point is at point 3 of
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 2 Programming with Help Function 2. Select with and press . 3. Move the work clamp with . Press when the needle point is at point 1 of the pattern. The first stitch (point 1) is programmed. 4. Select with and press . 5. Input the stitch length and the number of lines for a multiple stitch. Press . "2.0 mm" is input for a stitch length in the example. Input "030" to make the stitch length to 3.0 mm. To switch input between the stitch length and the number of lines, use . 6. Move the work clamp with . Press when the needle point is at point 2 of the pattern. 7. Move the work clamp with . Press when the needle point is at point 3 of the pattern. Be sure to press twice for a split at a corner like point 3. If a split is not made, the corner will be round. 8. Program the following points up to point 17 with the curve programming steps. When there is a liner section, move the needle point from the split to the next split, and press twice. In the example, a linear line is programmed between points 7 and 9. Be sure to program a linear line also for the matched section between points 24 and 26. By pressing , the needle point is returned to the previous point. It cannot be returned beyond the previous split. By pressing , the needle point is returned to the previous split. However, when the needle point is at a split, it cannot be moved. By pressing , the needle point is returned to the split before the previous split. 9. Press . Move the work clamp with . Press when the needle point is at point 18 of the pattern. 50 Programmer