Brother International LT2-B845 MKII Instruction Manual - Multi - Page 2
CAUTION, Sewing, Cleaning, Maintenance, inspection
View all Brother International LT2-B845 MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
A CAUTION ® (3 ,0 A Sewing • This sewing machine should only be used by operators who have received the necessary training in safe use beforehand. itk • The sewing machine should not be used for any applications other than sewing. • Turn off the power switch at the follow- ing times. The motor will keep turning even after the power is switched off as A a result of the motor's inertia. Wait until the motor stops fully before starting work. The machine may operate if the treadle is pressed by mistake, which could result in injury. A • When threading the needle • When replacing the needle and bob- bin • When not using the machine and when leaving the machine unattended • Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. • Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. • If an error occurs in machine, or if abnormal noises or smells are noticed, immediately turn off the power switch. Then contact your nearest Brother dealer or a qualified technician. • If the machine develops a problem, contact your nearest Brother dealer or a qualified technician. A Cleaning • Turn off the power switch before carrying out cleaning. The motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the motor stops fully before starting work. The machine may operate if the treadle is pressed by mistake, which could result in injury. • Be sure to wear protective goggles and gloves when handling the lubricating oil, so that no oil gets into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil under any circumstances, as it can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Maintenance and inspection ® • Maintenance and inspection of the sew- . If the power switch needs to be left on ing machine should only be carried out when carrying out some adjustment, be by a qualified technician. extremely careful to observe all safety precautions. 0 A• • Ask your Brother dealer or a qualified electrician to carry out any maintenance 9 When checking the rotary hook lubrica- and inspection of the electrical system. tion, do not touch moving parts such as the rotary hook, needle and needle bar A • Turn off the power switch and discon- with your finger or paper nor push them nett the power cord from the wall out- with other objects, otherwise injury or let at the following times, otherwise the damage to the machine may result. machine may operate if the treadle is pressed by mistake, which could result • Use only the proper replacement parts in injury. A as specified by Brother. However, the motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until • If any safety devices have been re- the motor stops fully before starting A moved, be absolutely sure to re-install work. them to their original positions and • When carrying out inspection, adjustment and maintenance check that they operate correctly before using the machine. • When replacing consumable parts such as the rotary hook • Any problems in machine operation which result from unauthorized modifi- cations to the machine will not be cov- ered by the warranty. - - Model No. LT2-B840 Mark II LT2-B870 Mark II