Brother International MFC 7225N Users Manual - English - Page 51
Broadcasting, Menu/Set, Search/Speed Dial, Start, Stop/Exit
UPC - 012502613282
View all Brother International MFC 7225N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 3 Broadcasting Broadcasting is when the same fax message is automatically sent to more than one fax number. You can include Groups, One-Touch, Speed-Dial numbers and up to 50 manually dialed numbers in the same broadcast. Press Menu/Set between each of the numbers. Use Search/Speed Dial to help you choose the numbers easily. (To set up Group dial numbers, see Setting up Groups for Broadcasting on page 5-3.) After the broadcast is finished, a Broadcast Report will be printed to let you know the results. 1 If it is not illuminated in green, press (Fax). 2 Load your document. 3 Enter a number using One-Touch, Speed-Dial, a Group number, Search or manual dialing using the dial pad. Press Menu/Set. 4 After you have entered all the fax numbers, press Start. Note ■ If you did not use up any of the numbers for Groups, access codes or credit card numbers, you can 'broadcast' faxes to as many as 260 (MFC-7220 and MFC-7225N) or 270 (FAX-2820, FAX-2910 and FAX-2920) different numbers. ■ The available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use Dual Access and Delayed fax. ■ Enter the long dialing sequence numbers as you would normally, but remember that each One-Touch and Speed-Dial number counts as one number, so the number of locations you can store becomes limited. (See Access codes and credit card numbers on page 5-4.) ■ If the memory is full, press Stop/Exit to stop the job or if more than one page has been scanned, press Start to send the portion that is in the memory. 3 - 7