Brother International MFC 7225N Users Manual - English - Page 72
Remote commands, Paging or Fax Storage settings
UPC - 012502613282
View all Brother International MFC 7225N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Remote Fax Options Remote commands Follow the commands below to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands Operation details 95 Change the Fax Forwarding, Paging or Fax Storage settings 1 OFF You can select Off after you have retrieved or erased all your messages. 2 Fax Forwarding 3 Paging 4 Fax Forwarding number 6 Fax Storage If you hear one long beep, the change has been accepted. If you hear three short beeps, you cannot change it because something has not been set up (for example, perhaps a Fax Forwarding or Paging number had not been registered). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number on page 6-7.) Once 6 you have registered the number, Fax Forwarding will work. You can select Off after you have retrieved or erased all your messages. 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax message(s). (See page 6-7.) 3 Erase faxes from the memory If you hear one long beep, fax messages have been erased from the memory. 97 Check the receiving status 1 Fax You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 98 Change the Receive Mode 1 External TAD If you hear one long beep, your change has been accepted. 2 Fax/Tel 3 Fax Only 90 Exit Press 9 0 to exit Remote Retrieval. Wait for the long beep, then replace the handset. 6 - 6