Home » Brother International Manuals » Multifunction Devices » Brother International MFC 7225N » Manual Viewer

Brother International MFC 7225N Network Users Manual - English - Page 12

SMTP client, TELNET, Web server HTTP

UPC - 012502613282

View all Brother International MFC 7225N manuals

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Introduction SMTP client Simple Mail Transfer Protocol (SMTP) client is used to send e-mails via Internet or Intranet. IPP 1 Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible printer via the internet. mDNS mDNS allows the Brother print/scan server to automatically configure itself to work in a Mac OS® X Simple Network Configured system. (Mac OS® X 10.2.4 or greater). TELNET The Brother print/scan server supports TELNET server for command line configuration. SNMP Simple Network Management Protocol (SNMP) is used to manage and monitor all sorts of equipments including computers, routers and terminals in a TCP/IP network. Web server (HTTP) The Brother print/scan server is equipped with a built in web server that allows you to monitor its status or change some of its configuration settings. Note We recommend Internet Explorer 6.0 (or higher) or Netscape Navigator 7.1 (or higher). If a different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 2.0. 1 - 5

Section	Page
Network USER’S GUIDE	1
Table of contents	5
1.Introduction	8
Overview	8
Types of network connection	9
Network connection example	9
Peer-to-Peer printing using TCP/IP	9
Network shared printing	10
Protocols	11
TCP/IP protocols and functionalities	11
DHCP/BOOTP/RARP	11
APIPA	11
DNS client	11
LPR/LPD	11
Port9100	11
SMTP client	12
IPP	12
mDNS	12
TELNET	12
SNMP	12
Web server (HTTP)	12
2.Configuring your network printer	13
Overview	13
IP addresses, subnet masks and gateways	13
IP address	13
How the IP address is assigned to your print/scan server:	13
Subnet mask	14
Gateway (and router)	14
Setting the IP address and subnet mask	15
Using the BRAdmin Professional utility and the TCP/IP protocol to configure your network printer (for Windows® only)	15
BRAdmin Professional utility	15
How to configure your machine using the BRAdmin Professional utility	15
Using other methods to configure your network printer	16
Changing the print/scan server settings	16
Using the BRAdmin Professional utility and the TCP/IP protocol to change the print/scan server settings (for Windows® only)	16
Using the HTTP (web browser) and the TCP/IP protocol to change the print/scan server settings	17
3.Front Panel Setup	18
LAN Main Setup Menu	18
Setup TCP/IP	18
BOOT Method	18
IP Address	20
Subnet Mask	21
Gateway	21
Node Name	21
WINS Config	22
WINS Server	22
DNS Server	23
APIPA	23
Setup Misc.	24
Ethernet	24
Printing the Network Configuration Page	24
Restoring the network settings to factory default	25
4.Network printing from Windows®: basic TCP/IP Peer-to-Peer printing	26
Overview	26
For Windows® 2000/XP users	26
Configuring the standard TCP/IP port	26
Printer driver not yet installed	26
Printer driver already installed	27
For Windows NT® 4.0 users	28
Installing the TCP/IP protocol	28
Installing the Brother Peer-to-Peer software	28
Associating to the printer	29
Adding a second Brother LPR port	30
For Windows® 95/98/Me users	30
Installing the Brother Peer-to-Peer software	30
Associating to the printer	31
Adding a second Brother LPR port	32
Other sources of information	32
5.Internet printing for Windows®	33
Overview	33
Windows® 2000/XP IPP printing	33
Specifying a different URL	35
Other sources of information	35
6.Network printing from Macintosh®	36
Overview	36
How to select the print server (TCP/IP) (Mac OS® 9.1 - 9.2)	36
How to select the print server (TCP/IP) (Mac OS® X 10.2.4 or greater)	38
Changing the configuration using a web browser	39
Other sources of information	39
7.Web Based Management	40
How to use a Web Browser to manage your Device	40
Overview	40
How to connect to your machine using a Browser	40
Password Information	40
8.Troubleshooting	41
Overview	41
General problems	41
CD-ROM is inserted, but does not start automatically	41
How to reset the Brother print/scan server to factory default	41
Network print software installation problems	41
The Brother print/scan server is not found during setup of the network print software installation or from the printer driver of the Brother machine in Windows®.	41
The Brother print/scan server is not found using the Simple Network Configuration capabilities of Mac OS® X.	41
Printing problems	43
Print job is not printed	43
Error during printing	45
Protocol-specific troubleshooting	45
Windows® 98/98SE/Me and Windows NT®4.0 Peer-to-Peer print (LPR) troubleshooting	45
Windows® 2000/XP IPP troubleshooting	46
Want to use a different Port number other than 631.	46
Get More Info option in Windows® 2000 not working	46
Web browser troubleshooting (TCP/IP)	47
Appendix A	48
Using services	48
Other ways to set the IP address (for advanced users and administrators)	48
Using DHCP to configure the IP address	48
Using BOOTP to configure the IP address	49
Using RARP to configure the IP address	49
Using APIPA to configure the IP address	50
Using ARP to configure the IP address	50
Windows® systems	50
UNIX®/Linux systems	51
Using the TELNET console to configure the IP address	51
Using the Brother Web BRAdmin server software for IIS* to configure the IP address	52
Print/Scan Server specifications	53
Function Table and Default Factory Settings	54

Match case Limit results 1 per page

Introduction

1 - 5

SMTP client

Simple Mail Transfer Protocol (SMTP) client is used to send e-mails via Internet or Intranet.

IPP

Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible printer

via the internet.

mDNS

mDNS allows the Brother print/scan server to automatically configure itself to work in a Mac OS

X Simple

Network Configured system. (Mac OS

X 10.2.4 or greater).

TELNET

The Brother print/scan server supports TELNET server for command line configuration.

SNMP

Simple Network Management Protocol (SNMP) is used to manage and monitor all sorts of equipments

including computers, routers and terminals in a TCP/IP network.

Web server (HTTP)

The Brother print/scan server is equipped with a built in web server that allows you to monitor its status or

change some of its configuration settings.

Note

We recommend Internet Explorer 6.0 (or higher) or Netscape Navigator 7.1 (or higher). If a different web

browser is used, make sure it is compatible with HTTP 1.0 and HTTP 2.0.