Brother International MFC-8810DW Network User's Guide - English - Page 32
For Touchscreen models, For example, Stop/Exit, Network name: SSID, Communication Mode
View all Brother International MFC-8810DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T)) For Touchscreen models 3 a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration. Check and record the current wireless network settings. Network name: (SSID) 3 Communication Mode Infrastructure Authentication method Open system Shared key WPA/WPA2-PSK 1 TKIP is supported for WPA-PSK only. Encryption mode NONE WEP WEP AES TKIP 1 Network key - For example: 3 Network name: (SSID) HELLO Communication Mode Infrastructure Authentication method WPA2-PSK Encryption mode AES Network key 12345678 Note If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press Menu. c Press Network. d Press WLAN. e Press Setup Wizard. f When WLAN Enable? is displayed, press On to accept. This will start the wireless setup wizard. To cancel, press Stop/Exit. g The machine will search for your network and display a list of available SSIDs. Choose using a or b. 25