Brother International MFC-8810DW Advanced User's Guide - English - Page 37
Remote fax commands, Change the Receive Mode
View all Brother International MFC-8810DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Receiving a fax Remote fax commands 4 Follow the commands below to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by l), the system will give two short beeps and you must enter a remote command. Remote commands Operation details 95 Change the fax forwarding, paging or fax storage settings 1 OFF 2 Fax Forwarding 3 Paging 4 Fax Forwarding number 6 Fax Storage You can choose Off after you have retrieved or erased all your messages. 4 One long beep means the change is accepted. If you hear three short beeps, you cannot make the change because something has not been set up (for example, a fax forwarding or paging number has not been registered). You can register your fax forwarding number by entering 4. (See Changing the Fax Forwarding number uu page 30.) Once you have registered the number, fax forwarding will work. 96 Retrieve a fax 2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages uu page 30.) 3 Erase faxes from the memory If you hear one long beep, fax messages have been erased from the memory. 97 Check the receiving status 1 Fax You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. 98 Change the Receive Mode 1 External TAD If you hear one long beep, your change has been accepted. 2 Fax/Tel 3 Fax Only 90 Exit Press 9 0 to exit remote retrieval. Wait for the long beep, then replace the handset. 31