Brother International MFC-8810DW Advanced User's Guide - English - Page 54
Making copies, Copy settings, Stop copying, Enlarging or reducing the image copied
View all Brother International MFC-8810DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7 Making copies 7 Copy settings 7 When you want to quickly change the copy settings for the next copy, use the temporary COPY keys. You can change multiple settings in any combination. The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer uu page 6.) To change a setting, press COPY and then press a or b and d or c to scroll through the COPY settings. When the setting you want is highlighted, press OK. When you are finished changing the settings, press Start to begin printing. Stop copying 7 To stop copying, press Stop/Exit. Enlarging or reducing the image copied 7 You can choose the following enlargement or reduction ratios: Press 100%* 97% LTRiA4 94% A4iLTR 91% Full Page 85% LTRiEXE 83% LGLiA4 78% LGLiLTR 70% A4iA5 50% Custom(25-400%) 1 Auto 2 200% 141% A5iA4 104% EXEiLTR * The factory setting is shown in Bold with an asterisk. 1 Custom(25-400%) allows you to enter a ratio from 25% to 400%. 2 Auto sets the machine to calculate the reduction ratio that best fits the size of paper. Auto is only available when using the ADF. To enlarge or reduce the next copy follow the instructions below: a Make sure you are in COPY mode . b Load your document. c Use the dial pad to enter the number of copies (up to 99). d Press Enlarge/Reduce, then press c. 48