Brother International MFC-9030 Service Manual - Page 19
Installing the update data onto the flash ROM of the facsimile machine, ENTER
UPC - 012502040019
View all Brother International MFC-9030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the update data onto the flash ROM of the facsimile machine NOTE: The following is an installation procedure example on a PC that is running Windows 95/98. (1) Copy the update data and transfer utility onto the desired directory of the hard disk. e.g., C:\UPDATE (2) Click the Start button, point to Programs, and then click MS-DOS Prompt to open an MS-DOS window. (3) Type the drive letter where the update data and transfer utility are located. In the above example, type C:\ from the command line and press the ENTER key. Then type CD UPDATE and press the ENTER key. (4) Check that your computer is connected with the facsimile machine correctly. (5) To start the transfer utility transmitting the update data to the flash ROM of the facsimile machine, type the following: ICEN filename /b Then press the ENTER key. During downloading, the machine beeps intermittently. Upon completion of the downloading, the machine beeps continuously. NOTE: If the facsimile machine cannot return to the standby state after completion of downloading, turn the power off and on. 2-2