Brother International MFC-9460CDN Network Users Manual - English - Page 39
Ethernet (wired network only), Status (For DCP-9055CDN
UPC - 012502625117
View all Brother International MFC-9460CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Control panel setup Ethernet (wired network only) 5 Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T full or half duplex mode by auto negotiation. Note If you set this value incorrectly, you may not be able to communicate with your print server. Status (For DCP-9055CDN, MFC-9460CDN and MFC-9465CDN)/Wired Status (For MFC-9560CDW) 5 This field displays the current wired network status. 5 Setup Wizard (wireless network only) 5 The Setup Wizard guides you through the wireless network configuration. (For more information, see the Quick Setup Guide or Using the Setup Wizard from the control panel on page 16.) WPS or AOSS™ (wireless network only) 5 If your WLAN access point/router supports either Wi-Fi Protected Setup (PBC 1) or AOSS™ (Automatic Wireless mode), you can configure the machine easily without a computer. (For more information, see the Quick Setup Guide or Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode) on page 16.) 1 Push Button Configuration WPS w/PIN Code (wireless network only) 5 If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the machine easily without a computer. (For more information, see Using the PIN Method of Wi-Fi Protected Setup on page 24.) WLAN Status (wireless network only) 5 Status 5 This field displays the current wireless network status. Signal 5 This field displays the current wireless network signal strength. 34