Brother International MFC 990cw Quick Setup Guide - English - Page 49
Restore the network settings to factory default, Entering Text for Wireless Settings, f
UPC - 012502620518
View all Brother International MFC 990cw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
For Wireless Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. a Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord). b Press MENU. c Press a or b to display Network and press Network. d Press a or b to display Factory Reset and press Factory Reset. e Press Yes. f Hold down Yes for 2 seconds to confirm. g The machine will restart, re-connect cables once this is complete. Entering Text for Wireless Settings When you are setting certain menu selections, you may need to enter text into the machine. Press to choose numbers, characters and special characters. Up to four letters are assigned to each button on the Touchscreen. By pressing the correct button repeatedly, you can access the character you want. Inserting spaces To enter a space, press OK to choose special characters, then press the space button or . Note The characters available may differ depending on your country. Making corrections If you entered an incorrect letter and want to change it, use the arrow buttons to move the cursor under the incorrect character. Then press . Re-enter the correct character. You can also insert letters by moving the cursor and entering a character. Repeating letters If you need to enter a letter that is on the same button as the letter before, press c to move the cursor to the right before you press the button again. 49