Brother International MFC-9970CDW Quick Setup Guide - English - Page 3
Remove the packing, material from the, machine - mp tray cover
UPC - 012502625131
View all Brother International MFC-9970CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2 Remove the packing material from the machine IMPORTANT DO NOT connect the AC power cord yet. a Remove the packing tape from the outside of the machine. b Open the MP tray a, and remove the plastic sheet b from the MP tray support, then close the MP tray. d Hold the green handle of the drum unit a and pull it out until it stops. e Gently pull the orange packing material towards the front of the machine to remove it. c Press the front cover release button and open the front cover. Remove the silica gel pack a. f Remove the packing tape and the 4 orange packing pieces. CCAAUUTTIOINON DO NOT eat the Silica Pack. Discard immediately. g Push the drum unit firmly back into the machine. h Close the front cover of the machine. 3
3
2
Remove the packing
material from the
machine
a
Remove the packing tape from the outside of
the machine.
b
Open the MP tray
a
, and remove the plastic
sheet
b
from the MP tray support, then close
the MP tray.
c
Press the front cover release button and open
the front cover. Remove the silica gel pack
a
.
CAUTION
DO NOT eat the Silica Pack. Discard immediately.
d
Hold the green handle of the drum unit
a
and
pull it out until it stops.
e
Gently pull the orange packing material
towards the front of the machine to remove it.
f
Remove the packing tape and the 4 orange
packing pieces.
g
Push the drum unit firmly back into the
machine.
h
Close the front cover of the machine.
IMPORTANT
DO NOT connect the AC power cord yet.