Brother International MFC-J220 Basic Users Manual - English - Page 49
Recording an outgoing message (OGM) on an external TAD, Multi-line connections (PBX)
UPC - 012502625049
View all Brother International MFC-J220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Recording an outgoing message (OGM) on an external TAD 6 Timing is important in recording this message. The message sets up the ways to handle both manual and automatic fax reception. a Record 5 seconds of silence at the beginning of your message. (This allows your machine time to listen for the fax CNG tones of automatic transmissions before they stop.) b Limit your speaking to 20 seconds. c End your 20-second message by giving your Fax Receive Code for people sending manual faxes. For example: "After the beep, leave a message or send a fax by pressing l 5 1 and Start." Note We recommend beginning your OGM with an initial 5-second silence because the machine cannot hear fax tones over a resonant or loud voice. You may try omitting this pause, but if your machine has trouble receiving, then you must re-record the OGM to include it. Multi-line connections (PBX) 6 We suggest you ask the company who installed your PBX to connect your machine. If you have a multi line system we suggest you ask the installer to connect the unit to the last line on the system. This prevents the machine being activated each time the system receives telephone calls. If all incoming calls will be answered by a switchboard operator we recommend that you set the Receive Mode to Manual. We cannot guarantee that your machine will operate properly under all circumstances when connected to a PBX. Any difficulties with sending or receiving faxes should be reported first to the company who handles your PBX. Telephone services and external devices External and extension telephones 6 Connecting an external or extension telephone 6 You can connect a separate telephone to your machine as shown in the diagram below. Connect the telephone line cord to the jack labeled EXT. Before you connect the external telephone, remove the protective cap (3) from the EXT. jack on the machine. 6 1 2 3 1 Extension telephone 2 External telephone 3 Protective Cap When you are using a telephone on the same phone line, the LCD shows Telephone. 35