Brother International MFC-J220 Basic Users Manual - English - Page 87
Dial Tone, Telephone line interference / VoIP, c
UPC - 012502625049
View all Brother International MFC-J220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Troubleshooting Dial Tone B Setting the dial tone to Detection will shorten the dial detect pause. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Dial Tone. Press OK. d Press a or b to choose Detection or No Detection. Press OK. e Press Stop/Exit. Telephone line interference / VoIP B If you are having problems sending or receiving a fax due to possible interference on the telephone line, we recommend that you change the modem speed to minimize errors in fax operations. a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Compatibility. Press OK. d Press a or b to choose Normal or Basic(for VoIP). Basic(for VoIP) reduces the modem speed to 9,600 bps and turns off ECM except for color fax sending. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed. To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP). Normal sets the modem speed at 14,400 bps. Press OK. B e Press Stop/Exit. Note VoIP (Voice over IP) is a type of phone system that uses an internet connection, rather than a traditional phone line. 73