Brother International MFC-J4620DW Online Users Guide HTML - Page 6

This product should be connected to an AC power source within the range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician. Power Cord Safety: • DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord to separate from the plug. Doing this might cause an electrical shock. • DO NOT allow anything to rest on the power cord. • DO NOT place this product where people can walk on the cord. • DO NOT place this product in a position where the cord is stretched or strained, as it may become worn or frayed. • DO NOT use the product or handle the cord if the cord has become worn or frayed. If unplugging your product, DO NOT touch the damaged/frayed part. • Brother strongly recommends that you DO NOT use any type of extension cord. • DO NOT use any cable, not included with this product, that does not meet the applicable cable specifications described in the Quick Setup Guide. It may cause a fire or injuries. Installation must be performed properly according to the Quick Setup Guide. DO NOT use this product during an thunderstorm. Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged at the wall jack. Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a wet location. FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire. DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire or electrical shock. Instead, use only a dry, lint-free cloth. For instructions on how to clean the product, see Online User's Guide. 6