Brother International MFC-J480DW Online Users Guide HTML - Page 463

Error Message Document Jam/too Long (ADF models) DR Mode in Use High Temperature Hub is Unusable. Image Too Long (MFC-J880DW/ MFC-J885DW) Image Too Small (MFC-J880DW/ MFC-J885DW) Ink Absorber Pad Full Cause The document was not inserted or fed correctly, or the document scanned from the ADF was too long. The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. The room temperature is too high. A hub or USB flash drive with hub has been connected to the USB direct interface. The proportions of your photo are irregular so effects could not be added. Action See Related Information: Telephone Line Interference/VoIP. Remove the jammed document, and then press . Set the document in the ADF correctly. See Related Information: Load Documents in the Automatic Document Feeder (ADF). See Related Information: Document Jams. Set Distinctive Ring to Off. See Related Information: Turn off Distinctive Ring. After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. Hubs, including a USB flash drive with a built in hub, are not supported. Unplug the device from the USB direct interface. Choose a regularly proportioned image. The size of your photo is too small to trim. Choose a larger image. The ink absorber box or flushing box is The ink absorber box or flushing box must full. These components are periodic be replaced. Call Brother Customer maintenance items that may require Service or a Brother Authorized Service replacement after a period of time to Center to have your machine serviced. ensure optimum performance from your Brother machine. Because these components are periodic maintenance items, the replacement is not covered under the warranty. The need to replace Reasons for cleaning are: 1. The machine automatically cleans itself after you remove the power cord and plug it back in. these items and the time period before 2. After a paper jam has been cleared, replacement is dependent on the number the machine automatically cleans itself of purges and flushes required to clean before the next received page is the ink system. These boxes acquire printed. amounts of ink during the different purging 3. The machine automatically cleans and flushing operations. The number of itself after sitting idle for more than 30 times a machine purges and flushes for days (infrequent use). cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the 4. The machine automatically cleans itself after ink cartridges of the same color have been replaced 12 times. machine automatically cleans upon power up. The use of non-Brother ink may cause frequent cleanings because non-Brother ink could cause poor print quality which is resolved by cleaning. The more cleaning the machine requires, the faster these boxes will fill up. Repairs resulting from the use of nonBrother supplies may not be covered under the stated product warranty. 457