Brother International MFC-J485DW Basic Users Guide - Page 52

Cannot Print, Replace Ink, Data Remaining, Disconnected, Document Jam, DR Mode in Use

Get Brother International MFC-J485DW PDF manuals and user guides View all Brother International MFC-J485DW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Error Message Action Cannot Print Replace Ink One or more of the ink cartridges have reached the end of their lives. Replace the ink cartridges. For more information, see the Online User's Guide: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. Data Remaining Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again. Disconnected Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). See Related Information: Telephone Line Interference/VoIP at the end of this section. Document Jam The document was not inserted or fed correctly, or the document scanned from the ADF was too long. See Related Information: Document Jams at the end of this section. DR Mode in Use The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. For more information, see the Online User's Guide: Turn off Distinctive Ring. High Temperature After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. Ink Absorber Full The ink absorber box or flushing box must be replaced. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. Reasons for cleaning are: 1. The machine automatically cleans itself after you remove the power cord and plug it back in. 2. After a paper jam has been cleared, the machine automatically cleans itself before the next received page is printed. 3. The machine automatically cleans itself after sitting idle for more than 30 days (infrequent use). 4. The machine automatically cleans itself after ink cartridges of the same color have been replaced 12 times. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Error Message
Action
Cannot Print
Replace Ink
One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more information, see the
Online User's Guide
:
Replace the Ink
Cartridges
.
•
You can still scan even if the ink is low or needs to be
replaced.
Data Remaining
Press
Stop/Exit
. The machine will cancel the job and clear it from the
memory. Try to print again.
Disconnected
Try to send or receive again.
If calls are stopped repeatedly and you are using a VoIP (Voice over
IP) system, try changing the Compatibility to Basic (for VoIP).
See
Related Information
:
Telephone Line Interference/VoIP
at the end
of this section.
Document Jam
The document was not inserted or fed correctly, or the document
scanned from the ADF was too long.
See
Related Information
:
Document Jams
at the end of this section.
DR Mode in Use
The machine is in Distinctive Ring mode. You cannot change the
Receive Mode from Manual to another mode.
Set Distinctive Ring to Off.
For more information, see the
Online User's Guide
:
Turn off Distinctive
Ring
.
High Temperature
After cooling the room, allow the machine to cool down to room
temperature. Try again when the machine has cooled down.
Ink Absorber Full
The ink absorber box or flushing box must be replaced. Call Brother
Customer Service or a Brother Authorized Service Center to have your
machine serviced.
Reasons for cleaning are:
1.
The machine automatically cleans itself after you remove the
power cord and plug it back in.
2.
After a paper jam has been cleared, the machine automatically
cleans itself before the next received page is printed.
3.
The machine automatically cleans itself after sitting idle for more
than 30 days (infrequent use).
4.
The machine automatically cleans itself after ink cartridges of the
same color have been replaced 12 times.
36