Brother International MFC-J870DW Wi-Fi Direct Guide - Page 14
I see error messages when configuring Wi-Fi Direct™ from the control panel menu. continued
![]() |
View all Brother International MFC-J870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Troubleshooting I see error messages when configuring Wi-Fi Direct™ from the control panel menu. (continued) Error Message Cause Action No Device The Brother machine cannot find your mobile device. Make sure your machine and mobile device are in the Wi-Fi Direct™ mode. Move the mobile device closer to your Brother machine. 3 Move your Brother machine and the mobile device to an obstruction-free area. If you are manually configuring the Wi-Fi Direct™ network, make sure you have entered the correct password. If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. A device is already connected. Press [OK]. Another mobile device is already connected to the Wi-Fi Direct™ network where the Brother machine is the G/O. After the current connection between your Brother machine and another mobile device has shut down, try to configure the Wi-Fi Direct™ settings again. Confirm the connection status by printing the Network Configuration Report (see Software and Network User's Guide). 11
![](/manual_guide/products/brother-international-mfcj870dw-wifi-direct-guide-bbe2f9c/14.png)