Brother International MFC-L2700DW Quick Setup Guide - Page 1
Brother International MFC-L2700DW Manual
View all Brother International MFC-L2700DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
DCP‑L2520DW / DCP‑L2540DW / MFC-L2680W / MFC-L2685DW / MFC‑L2700DW / MFC‑L2705DW / MFC-L2707DW Quick Setup Guide Not all models are available in all countries. The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals. Version F USA/CAN Watch our FAQ Videos for help with setting up your Brother machine: solutions.brother.com/videos. Unpack the machine and check the components A Drum Unit (Pre‑installed) AC Power Cord (only for certain models) Quick Setup Guide CD‑ROM B Starter Toner Cartridge Telephone Line Cord Product Safety Guide (For MFC models) Basic User's Guide (only for certain models) Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. Manuals in Spanish for this model are available on the enclosed CD-ROM. (USA only) Manuales en Español para este modelo están disponibles en el CD-ROM incluido. (sólo en Estados Unidos) NOTE: • The components included in the box and the AC power plug may differ depending on your country. • The illustrations in this Quick Setup Guide are based on the MFC‑L2700DW. • You must purchase the correct interface cable for the interface you want to use. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE‑T or 100BASE‑TX Fast Ethernet Network. 1 Remove the packing materials and install the toner cartridge A B B B A A Remove the orange part. Remove the orange part. 2 Load paper in the paper tray Adjust the paper guides. 3 Connect the power cord and turn on the machine Back Front 4 Select your language (if needed) 1. (DCP model) a. Press Menu. b. Press ▲ or ▼ to display General Setup, and then press OK. c. Press ▲ or ▼ to display Local Language, and then press OK. (MFC model) Press Menu, 0, 0. 2. Press ▲ or ▼ to select your language, and then press OK. 3. Press Stop/Exit. 5 Configure the machine for faxing (for MFC models only) If you do not plan to use the fax feature on this machine, go to step 6. A. Connect the telephone line cord B. Set the date and time Date 1. Press Menu, 0, 1, 1. 2. Enter the last two digits for the year on the dial pad, and then press OK. 3. Enter the two digits for the month on the dial pad, and then press OK. 4. Enter the two digits for the day on the dial pad, and then press OK. Clock Type 1. Press ▲ or ▼ to select 12h Clock or 24h Clock, and then press OK. Time 1. Enter the time using the dial pad, and then press OK. 12h Clock only Press ▲ or ▼ to select AM or PM, and then press OK. 2. Press Stop/Exit. 6 Connect the machine to your computer/mobile device • Windows® PC with a CD-ROM drive, go to step 6A • Windows® PC without a CD-ROM drive, go to step 6B • Macintosh, go to step 6B • Mobile device users with a WPS/AOSS™-supported access point/router, go to step 6C