Brother International NX-200 Users Manual - English - Page 29
When using the twin needle, be sure to, attach zigzag foot J, otherwise
View all Brother International NX-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Insert the extra spool pin onto the bobbin 4 winder shaft. Insert the extra spool pin so that it is perpendicular to the bobbin winder shaft. 1 Thread the upper thread in the same way that 7 the upper thread for the left side was threaded. 1 1 Bobbin winder shaft Swing down the spool pin so that it is 5 horizontal. 1 Thread guide cover • For details, refer to step 8 through 0 of "Threading the upper thread" (page 20). Without passing the thread through the 8 needle bar thread hook, manually thread the right needle. Pass the thread through the eye of the needle from the front. Place the upper thread spool for the needle on 6 the right side onto the extra spool pin, and then secure it with the spool cap. The thread should unroll from the top front of the spool. 1 2 1 Spool cap 2 Spool • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged. Attach zigzag foot "J". 9 • For details on changing the presser foot, refer to "Replacing the presser foot" (page 29). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. Turn on the sewing machine. 0 APPENDIX INDEX Upper Threading 23