Brother International PE525 Operation Manual - Page 85
Error Message, Probable Cause
View all Brother International PE525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
No Error Message Probable Cause 9 You pressed the back key or the embroidery key when a pattern was selected. You tried to select an embroidery pattern or change the layout when 10 the needle was down. The machine is turned on while the needle is lowered and the embroidery unit is attached. 11 You tried to initialize the embroidery unit with the embroidery foot lowered. 3 12 When 13 or more patterns are in "Removable Disk", a pattern was being retrieved. The start/stop button was pressed after selecting a pattern which is 13 saved in the machine's memory or entered from the USB port without pressing (Retrieve key). 14 The needle position button or thread cutter button was pressed while the bobbin winder shaft is moved to the right. 15 A pattern is being saved. 16 The start/stop button was pressed when no pattern is selected. 17 Bobbin thread has run out. Little bobbin thread remains. Troubleshooting 83