Brother International PED-BASIC Users Manual - English - Page 11
Before Use, Contents, Installing the Software, Getting Started, Menu Bar Commands, Name/Button - card
View all Brother International PED-BASIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Contents Before Use Installing the Software NO. Name/Button 7 Pattern size slider Function This can be used to size the pattern selected in the "Available patterns list" (5). The pattern size can be changed by a ratio between 90% and 120%. The pattern cannot be sized to exceed the size of the selected hoop size. • The new size can be checked with the "Size display" (6). • This is available only if one pattern in the Available patterns list (5) is selected. 8 Select button ( ) Click this button to add the pattern selected in the "Available patterns list" (5) to the "Selected patterns list" (A). (See page 8, "Select the patterns.") 9 Write button () Click this button to write to an original card the patterns displayed in the "Selected patterns list" (A). (See page 9, "Write the data to an original card.") 0 Deselect button Click this button to remove the pattern selected in the "Selected patterns list" (A). () A Selected patterns list Patterns selected with (8) are displayed here. The data will be written to an original card in the order displayed. B Card capacity indicator This shows the capacity of the patterns selected in the "Selected patterns list" (A). (See page 9, "Reading the Card capacity indicator:") C Icon size button () Click this button to switch between large and small the display Example) size of the pattern images shown in the lists. D Properties button () Click this button to display the information (size, number of stitches, and colors) for the pattern selected in the "Available patterns list" (5) or the "Selected patterns list" (A). This is available only if one pattern is selected. E Preview button () Click this button to display a three-dimensional image of the pattern selected in the "Available patterns list" (5) or the "Selected patterns list" (A). Click the button indicated on the right at the bottom of the dialog box to change the display magnification as described below. Zooms so that the image fills the dialog box Zooms so the pattern can be compared relative to the size of the embroidery hoop F Print button () Click this button to print the information for the pattern selected in the "Available patterns list" (5) or the "Selected patterns list" (A) according to the settings specified after clicking [File], then [Print Setup]. This is available only if one pattern is selected. Getting Started Menu Bar Commands 7