Brother International PJ622 PocketJet 6 User Guide - Page 10
Charging the Rechargeable, Li-ion Battery
View all Brother International PJ622 PocketJet 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 Note When installing the rechargeable Li-ion battery, insert the battery removal ribbon into the battery compartment, and then install the battery. The battery removal ribbon is not needed when removing the rechargeable Li-ion battery. d Move the slide switches outward to lock the battery in place. Note The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage. Removing the Rechargeable Li-ion Battery 1 Move the slide switches on the rechargeable Li-ion battery inward, and then remove the battery from the printer. Charging the Rechargeable Li-ion Battery 1 The rechargeable Li-ion battery can be charged while it is inserted in the printer and also while it is removed from the printer. Perform the following procedure to charge the rechargeable Li-ion battery. Note • Charge the rechargeable Li-ion battery immediately after purchase using the following procedure. • Up to 180 minutes is needed to fully charge a rechargeable Li-ion battery. About 300 pages can be printed when using a new, fully-charged rechargeable Li-ion battery. Charging While Installed in the Printer 1 a Make sure that the printer is turned off. b Make sure that the rechargeable Li-ion battery is installed in the printer. 1 1 Slide switches c Use the AC adapter and AC power cord to connect the rechargeable Li-ion battery to an AC power outlet, or use the DC cable to connect the battery to a DC power outlet. The battery indicator lights in orange. When the rechargeable Li-ion battery is fully charged, the battery indicator turns off. 6