Brother International PJ622 PocketJet 6 User Guide - Page 48
Indicator Warnings
View all Brother International PJ622 PocketJet 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 6 Indicator Warnings 6 Problem The POWER indicator does not light No rechargeable Ni-MH battery found when charging Time-out when charging the rechargeable Ni-MH battery Solution The printer is receiving no power. If you are using AC or DC power, make sure that the AC adapter or DC cable is properly connected (see Connecting the Printer to External Power on page 1) and make sure that the AC or DC power outlet is turned on. If you are using DC power, check the fuse. The printer did not detect a rechargeable Ni-MH battery when you tried to charge the battery. Make sure that the rechargeable Ni-MH battery is installed properly and that there are no broken wires at the battery or connector. For more information, see Installing the Rechargeable Ni-MH Battery on page 2. If the rechargeable Ni-MH battery is connected properly, the battery may have overheated while charging. Allow the rechargeable Ni-MH battery to cool before charging it again. If this is a reoccurring problem, replace the rechargeable Ni-MH battery. Too much time is needed to charge the rechargeable Ni-MH battery (normally the battery should be fully-charged within 120 minutes). Replace the rechargeable Ni-MH battery. 44