Brother International PQ-1300 Users Manual - English - Page 13

CONTENTS Accessories Names of Parts Threading (2) Note Please turn power is off before using automatic needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine. Upper Threading 1 7 6 8 4 23 5 1 6 7 2 4 3 5 8 9 0 A 9 0 A Using the Automatic Needle Threader q Make sure thread take-up lever is in highest position and presser foot is up. V When using polyester, you should run the thread through all three holes of the thread guide. V If the thread is still twisted, run the thread through the holes backwards as shown in diagram. Before You Begin Changing Needles and Light Bulb Threading Stitch Samples and Changing Needle Chart Presser Feet Basic Sewing Caring for Your Machine Automatic Needle Threader Hook Pin 1 Pull hand wheel towards you until 3 Lower automatic needle threader. 4 Catch thread with hook. 5 Raise needle threader lever while needle is in the highest position, and lower presser foot. 2 Take thread in your left hand, and V Pull thread along the right side of the pin. V Pull thread to the right, and make sure it has been caught with the hook. gently holding the end of the thread. 9 gently pull it forwards. Trouble Shooting