Brother International PQ-1500S Users Manual - English - Page 24

Fabric Separator(for joining lining to fabric) ✽ Use this technique for sewing velvet and lining together. 1 Raise needle and foot. 2 Move separator so it sits under presser foot. 3 Make sure it is lined up so that the needle passes through the slot of the separator without hitting the plate itself. 4 Secure liner plate in place with lining plate screws. 5 Set pressure of sewing feet and feed position to pin feeding position. 6 Pull thread until lower needle catches fabric. ✽ Sew 2-3 reinforcement stitches. 7 When not using separator, it can be swung off to the side as illustrated in drawing. Needle Separator • Use the separator to neatly sew 2 hard to manage fabrics together by keeping them from interacting with one and other before the needle sews them together in a perfect seam. Fabric Separator Needle Lining Separator Velvets Seam Guide 1 Tighten the screw securely with a screwdriver since it might otherwise loosen due to vibration. 1 Installation To be able to adjust the position of the foot towards the arrow. Note • Lighten the presser foot pressure slightly when using the fabric separator. Adjustment 19