Brother International PT 1300 Users Manual - English - Page 38
Size & Width Functions
UPC - 012502526346
View all Brother International PT 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SIZE & WIDTH FUNCTIONS The character size of the entire text can be adjusted using both the size and width functions. Since the character size that can be used depends on the width of the tape, the following table shows the character sizes that can be used with each tape width. Tape width Sizes (in points) 1/4" (6 mm) 12, 9 3/8" (9 mm) 18, 12, 9 1/2" (12 mm) 24, 18, 12, 9 3/4" (18 mm) 36, 24, 18, 12, 9 The default size setting is AUTO and the default width setting is OFF. The currently selected size setting is always shown by the indicators at the top of the display. When the ON width setting is selected, the Wide indicator at the top-left corner of the display lights up. With the AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest size possible. However, five other point sizes are also available and each can be printed in wide characters. Size setting (in points) Width setting OFF Width setting ON A 36 ( ) 24 ( A ) 18 ( A ) 12 ( A ) 9 (A) 34