Brother International PT-1750 Users Manual - English and Spanish - Page 10
PRINT HEAD & ROLLERS, To clean the print head and rollers - labeling system
View all Brother International PT-1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine's print head and rollers. This is particularly likely when you are using the unit outdoors or in a very dusty environment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the label text. Therefore, as with a tape recorder, the machine's head may need to be cleaned from time to time. To clean the print head and rollers: 1 Turn off the machine. 2 Open the tape compartment cover, then remove the tape cassette if one is installed. The print head and rollers are located in the tape compartment. 3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down motion. Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while rotating them with your finger. 4 Install a tape cassette, close the tape compartment cover, and then try printing again. 5 If dust still remains, repeat steps 3 and 4 using a cotton swab dipped in isopropyl (rubbing) alcohol. If none of the above works, contact your service representative. Print head Print head Rollers Cotton swab Cleaning can also be done by using the optional print head cleaning cassette (TZ- CL4). 8