Brother International PT-1750 Users Manual - English and Spanish - Page 33
TROUBLESHOOTING, Problem, Remedy - lock
View all Brother International PT-1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
TROUBLESHOOTING Problem 1. The display stays blank after you have turned on the machine. 2. The machine does not print or the printed characters are blurred. 3. The text files that you stored in the memory are no longer there. 4. The printed characters are not formed properly. 5. A blank horizontal line appears through the printed label. 6. Striped tape appears. 7. The machine has "locked up" (i.e., nothing happens when a key is pressed, even though the machine is on.) Remedy • Check that the AC adapter is connected correctly. • If you are using batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. • Check that the tape cassette has been inserted properly. • If the tape cassette is empty, replace it with a new one. • Make sure that the tape compartment cover has been closed. If the batteries are low, replace them with new ones. If you are using batteries, they may be low. Try using the AC adapter or replace the batteries with new ones. Clean the print head as explained on page 8. You have reached the end of the tape. Replace the tape cassette with a new one. Turn off the machine, and then while holding down f and R, press b to turn the machine back on. Finally, release f and R. The text and formats in the display and all text files stored in the memory are erased. 31