Brother International PT-P750W Raster Command Reference - Page 16

Raster Command Reference Descriptions for the numbers in the print data on the previous page are provided in the following table. For details on each command, refer to "4. Printing Command Details". No. Command Name Description １ Invalidate A 100-byte invalidate command is sent. 2 Initialize The "initialize" command is sent. 3 Switch dynamic command mode The printer is switched to raster mode. Send this command before sending raster data to the printer. 4 Job ID setting commands Internal specification commands Since this is a command for outputting with the commercial version driver, it is unnecessary for the user to send this command. 5 Print information command Media size information for the print data is sent. This is the command for "24 mm" tape. 6 Various mode settings This is a command for specifying a mode. (1Bh+69h+4Dh+00H) Here, nothing is specified. 7 Specify the page number in "cut each * labels" The number of pages printed before automatically cutting is specified. 8 Advanced mode settings This is the command for specifying settings for the advanced mode. 9 Specify margin amount Specifies the amount of the margins. This is the command for "15 dots". 10 Select compression mode TIFF compression mode is selected. 11 Raster data Raster data continues. 12 Print command Since it is not the last page, the print command is sent at the end of the page. 13 Print command with feeding Since it is the last page, the print command with feeding is sent at the end of the page. Switch automatic 14 status notification mode Dynamically switches whether an automatic status notification is given during printing. - 12 - 2. Print Data