Brother International PT-P750W Raster Command Reference - Page 22
Maximum and minimum lengths, Minimum length, Maximum length
View all Brother International PT-P750W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Raster Command Reference 2.3.4 Maximum and minimum lengths The maximum and minimum lengths are defined below. TZe tape 180dpi×180dpi Type Minimum length Normal 4.4mm 0.18" 31 dots 180dpi×360dpi Type Normal Minimum length 4.2mm 0.17" 60 dots Maximum length 1000 mm 39.37" 7086dots Maximum length 1000 mm 39.37" 14172dots Heat-Shrink Tube Type Minimum length Maximum length Normal 4.4 mm 0.18" 31 dots 500 mm 19.69" 3543dots * The minimum length with the driver (minimum print data length: 2 mm margins × 2 + minimum print area) is based on the machine specifications (due to the machine cutter position), and the minimum length of tape that can be fed out is 24.5 mm. For example, even when the minimum print data of 4.4 mm is created, the print result will be the 24.5 mm of tape shown below, since the minimum length of tape that can be fed out is 24.5 mm. In other words, the print data will be on 24.5 mm of tape when the print data length is 24.5 mm or less. - 18 - 2. Print Data