Brother International PocketJet 3 Users Manual - English - Page 49
Cleaning the Platen, Roller
View all Brother International PocketJet 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Cleaning the Platen Roller Dirt and debris on the platen roller can make the roller feed paper into the printer at an angle, degrade the quality of the printed image, or both. 1. Make sure the printer is powered on without paper loaded. NOTE: If paper is loaded and detected by the printer when you attempt to initiate Cleaning Mode, a Form Feed will be executed instead. 2. Press the main switch for about two seconds. The "Data" LED will illuminate. 3. Press the main switch again for less than 2 seconds. The feed motor will begin to turn. 4. Insert the black cleaning cloth that came with the printer into the printer's paper input slot with the rough black side, which contains the cleaning material, towards the front of the printer. See Figure 18. The printer pulls the Cleaning Cloth through. 5. The roller movement will stop automatically after about 60 seconds, and the printer returns to an idle state. If you press the main switch before 60 seconds has elapsed, this will toggle the feed motor on and off. Pressing the main switch twice quickly will shut off the printer. Page 45