Brother International QL-1060N Network Users Manual - English - Page 16
Uncon d, Static, Boot Method, IP address, Subnet Mask, Gateway, Windows, Macintosh - default password
UPC - 012502618812
View all Brother International QL-1060N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
c Double-click the unconfigured device. Windows® Macintosh® Configuring your network printer 2 Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen. • If the device requires a password, the default password is access. • You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing the Printer Settings on page 14. d Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh® e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. 11
Configuring your network printer
11
2
c
Double-click the unconfigured device.
Note
•
If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as
Unconfigured
in the BRAdmin Light utility screen.
•
If the device requires a password, the default password is
access
.
•
You can find the node name and Ethernet address by printing out the Printer Settings Page. See
Printing
the Printer Settings
on page 14.
d
Choose
Static
from
Boot Method
. Enter the
IP address
,
Subnet Mask
and
Gateway
(if needed) of
your print server.
e
Click
OK
.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows
®
Macintosh
®
Windows
®
Macintosh
®