Brother International Quattro 6000D INSTALLATION KIT 3 - Multi - Page 5

ENGLISH Installation Overview First, use the Certification Key Issuing Wizard on the enclosed CD-ROM to obtain a Certification Key. Then, use the CERTIFICATION key within the Settings screen, page 5, to activate the upgrade application for KIT III on the sewing machine. In the procedures section, indicates operations performed with the sewing machine and indicates operations performed with the computer. [Step 1] Make a note of the internal machine identification number (No.). [Step 2] Insert the CD-ROM into the computer's CD-ROM drive, and then start the Certification Key Issuing Wizard. [Step 3] Follow the wizard instructions for obtaining the Certification Key. Computer Requirements Before starting the Certification Key Issuing Wizard, check that the computer to be connected meets the following operating conditions. Computer Operating System CD-ROM drive Others IBM-PC or compatible computer Windows XP, Windows Vista and Windows 7 Required for installation Internet connection available and one available USB port (required to upgrade the sewing machine) when using computer * "IBM" is a registered trademark of IBM Corporation in the United States and other countries. * "Windows XP", "Windows Vista", and "Windows 7", are registered trademarks of Microsoft Corporation in the United States and other countries. * Each company whose software title is mentioned in this guide has a Software License Agreement specific to its proprietary programs. All other brands and product names mentioned in this guide are registered trademarks of their respective companies. However, the explanations for markings such as ® and ™ are not exhibited clearly within the text. [Step 4] Install the upgrade application for KIT III on the sewing machine. [Step 5] Remove the USB media, and turn the machine off and then on again. [Step 6] After the upgrade has been successfully installed, certify the "KIT III" in the Settings screen of the sewing machine. 3