Brother International Quattro 6000D INSTALLATION KIT 3 - Multi - Page 6

Installation Procedure The following procedure describes how to upgrade your sewing machine to KIT III. Note • If the procedure described below is not fully completed, your sewing machine cannot be upgraded to KIT III. • Access to the Internet is required in order to obtain a Certification Key. a Make a note of the 10-digit number (internal machine identification number) displayed beside "No." on page 5 of the Settings screen. Memo • Make sure the internal machine identification number (No.) is recorded accurately as these numbers need to be entered within the Certification Key Issuing Wizard in order to obtain the Certification Key. Internal machine identification number (No.) Version number c Open the designated drive for your CD-ROM (usually the "D" drive) on the computer (My Computer), double-click to start the Certification Key Issuing Wizard. Memo • The following procedure can be used to start the Certification Key Issuing Wizard. 1. Click Start. 2. Click Run or in the search box, type run, and then, in the list of results, click Run. → The Run dialog box appears. 3. Type the path to the application file (D:\KeyWizard_Kit3.exe), and then click OK. → The Select Language dialog box automatically appears. d Select the desired language, and then click OK. * The number of pages in the Settings screen may differ depending on the version. Note • The internal machine identification number that appears beside "No." is different from the machine serial number (SER. NO.) located on the label attached to the back of the sewing machine. → KIT III Certification Key Issuing Wizard appears. e Carefully read the information that appears, and then click Next. b Insert the CD-ROM into the computer's CDROM drive. Memo • In Windows 7 or Windows Vista, when the AutoPlay dialog box appears, click Open folder to view files. 4