Brother International SB530T Operation Manual - Page 16
Threading The Machine
View all Brother International SB530T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
KNOWING YOUR SEWING MACHINE Feed dog position switch Use the feed dog position switch to raise or lower the feed dogs according to the job that is being done. When darning or sewing on buttons, the feed dogs should be lowered. (The garment will not be fed.) Note ● When raising or lowering the feed dogs, move the feed dog position switch as far as possible to the appropriate side. Since the feed dogs can not be lowered using the feed dog position switch immediately after they are raised, turn the handwheel toward you (counterclockwise) once and after the feed dogs are raised, lower them using the feed dog position switch. 3 2 1 1 Feed dog position switch 2 Down position 3 Up position THREADING THE MACHINE Winding the bobbin CAUTION ● We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB: XA5539-151). Using other bobbins may cause damage to the machine. Actual size 11.5 mm (7/16 inch) This model Other models 1 Hook of the bobbin-winding thread guide 2 Pre-tension disk 3 Bobbin winder shaft 4 Bobbin 15