Brother International SB530T Operation Manual - Page 6
The Main Parts
View all Brother International SB530T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
KNOWING YOUR SEWING MACHINE THE MAIN PARTS 5 43 2 6 1 7 E 8 9 0 A CD B 1 Bobbin winder (Page 15) This winds the thread onto the bobbin for use as the lower thread. 2 Stitch length dial (Page 14) Rotate the dial to control the stitch length. 3 Stitch width dial (Page 14) Rotate the dial to control the stitch width. 4 Upper tension-control dial (Page 31) This controls the tension of the upper thread. 5 Bobbin-winding thread guide and pre-tension disc (Page 15, 20) 6 Thread take-up lever (Page 22) 7 Thread cutter (Page 28) Pass the threads through the thread cutter to cut them. 8 Needle threader (Page 23) 9 Quick-set bobbin (Page 18, 24) 0 Flat bed attachment with accessory compartment (Page 5) A Presser foot (Page 8) B Feed dog position switch (Page 15) C Reverse sewing lever (Page 14) Push this lever to stitch in the reverse direction. D Pattern indication window (Page 9) Shows the stitch number to be performed. E Pattern selection dial (Page 9) Rotate the dial in either direction to choose the stitch you want. F Handwheel Used to manually raise and lower the needle. G Buttonhole fine-adjustment screw (Page 40) H Main power and sewing light switch (Page 7) You can turn the main power and sewing light switch on and off. I Foot controller jack / socket (Page 6) Plug in the foot controller plug and connect the machine to the power supply. J Presser foot lever (Page 20) Used to raise and lower the presser foot. N F M L G K OH I J K Buttonhole lever (1-Step automatic buttonhole) (Page 38) Lower the buttonhole lever when sewing buttonholes. L Handle Carry the sewing machine by its handle when transporting the machine. M Thread guide (Page 17, 21) This is used when winding the thread onto the bobbin and then threading the machine. N Spool pin and spool cap (Page 16, 21) This holds the spool of thread. O Foot controller (Page 7) You can use this to control the sewing speed, and to start and stop sewing. Foot Controller: Model KD-1902 for 110-120V area KD-1902 for 110-127V area (Brazil only) Model KD-2902 for 220-240V area The foot controller part code differs depending on the country or region. Contact your dealer or the nearest authorized service center. Flat bed attachment The accessories are stored in the storage space in the flat bed attachment. Swing the lid of the flat bed attachment 1 toward you to open the storage space. 1 Flat bed b a attachment 2 Accessory compartment X The bag of accessories is in the storage space. 5