Brother International Simplicity SB7050E Users Manual - English - Page 13
Needle and embroidery foot, Right-side/rear view
View all Brother International Simplicity SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Needle and embroidery foot section Right-side/rear view a Thread guide disk (page 40) Pass the thread through the thread guide disk when using the needle threader to thread the needle. b Needle bar thread guide (page 40) Pass the upper thread through the needle bar thread guide. c Needle plate When the needle is lowered, it enters the hole in the needle plate. d Needle plate cover (page 78) Remove the needle plate cover to clean the bobbin case and race. e Bobbin cover/bobbin case (page 35) Remove the bobbin cover, and then insert the bobbin into the bobbin case. f Embroidery foot "Q" (page 80) This presser foot is used for embroidering. a Handle Carry the machine by its handle when transporting the machine. b Handwheel (page 38) Turn the handwheel toward you (counterclockwise) to raise and lower the needle. c Embroidery card slot (page 55) Insert the embroidery card. d USB port (for a USB flash drive (USB flash memory)) In order to import patterns from a USB flash drive (USB flash memory), plug the USB media directly into the USB port. e Air vent The air vent allows the air surrounding the motor to be exchanged. Do not cover the air vent while the machine is being used. f Main power switch (page 18) Use the main power switch to turn the machine on and off. g Power supply jack (page 18) Insert the plug on the power supply cord into the power supply jack. Memo z Refer to pages 10 through 13 while you are learning to use your machine. 11