Brother International Simplicity SB7050E Users Manual - English - Page 61
the size of the pattern being embroidered.
![]() |
View all Brother International Simplicity SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Lower the presser foot lever. d Use scissors to cut the thread at the beginning g of the stitching. Cut the thread at the edge of the stitching. a a Presser foot lever 2 Press e (Start/stop button). Note z If the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning. a a Start/stop button Note z Do not leave objects in the range of motion of the embroidery frame. The frame may strike the object and cause a poor finish to the embroidery pattern. Press (Start/stop button) again. h X The embroidery starts again and stops automatically with reinforcement after one color has been completed. When programmed thread cutting is set, the thread is cut automatically after reinforcement. In this case, go to step j . CAUTION Press i (Thread cutter button) once. ● Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the embroidery foot and cause injury or needle breakage. a After progressing 5-6 stitches, press f (Start/stop button) to stop the machine. a Thread cutter button X The needle is raised and the threads are cut. Raise the presser foot lever. j a a Presser foot lever Memo z If the embroidery foot is not raised, the upper thread cannot be replaced. Embroidering 59
![](/manual_guide/products/brother-international-simplicity-sb7050e-users-manual-english-9db3a6d/61.png)