Brother International TD-2020 ESC/ P Command Reference - Page 79
With Postnet, Code93, Upc/ean Extension, Code128 And Gs1-128ucc/ean-128, No, B Or B
View all Brother International TD-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ESC/P Command Reference Note * For parameter numerals 0-9, both 00h-09h and 30h-39h are recognized. * The parameter types a, b and c are recognized even when uppercase. * The parameter "parentheses deletion" is available only when GS1-128 (UCC/EAN-128) is selected. * The parameter "ratio between thick and thin bars" is available only when t0, t1 or t9 is selected. * The parameter "equalize bar lengths" is available only when t5 or t6 is selected. * If any other type is selected, these parameters are ignored. * When there is no type command or an invalid type command has been specified, CODE39 is specified. * The number of characters that can be entered for each barcode type is as follows: t0: 1-50 characters ("*" is not included) t1: 1-64 characters t5: 7 characters (for EAN-8) 12 characters (for EAN-13) 11 characters (for UPC-A) t6: 6 characters t9: 3-64 characters (Must begin and end with A, B, C, or D.) ta: 1-64 characters tb: 1-64 characters tc: 3-15 characters (begins with "01") (except with RSS Expanded) 1-64 numbers or 1-40 letters* (for RSS Expanded) * ISO646 characters can be printed. (numbers, letters, spaces and _) td: 1-64 characters te: 5 characters, 9 characters, 11 characters tf: 2 characters, 5 characters tg: 1-14 characters (2) B or b: Beginning of barcode data (3) [Barcode data]: Barcode data ? (Generate check digit): Generates a check digit when "?" is in the barcode data. The position of "?" is irrelevant as long as it is within the barcode data. With POSTNET, CODE93, UPC/EAN EXTENSION, CODE128 and GS1-128(UCC/EAN-128), no check digit is generated. If "?" is inserted, it is treated as barcode data. With only UPC/EAN EXTENSION, the data is printed above the barcode. - 73 - 5. Control Command Details