Brother International TD-2135NWB Raster Command Reference - Page 34
ESC i M, Various mode settings, ESC i d, Specify margin amount feed amount
View all Brother International TD-2135NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Raster Command Reference ESC i M Various mode settings ASCII: ESC i M {n1} Hexadecimal: 1B 69 4D {n1} Parameters Definitions of {n1} The meaning of each bit in a 1-byte parameter is described below. 0 ~ 2bit:Not used 3bit:Inverted 180 Degrees 1. Rotates 180 degrees 0. Does not rotate 180 degrees 4bit:Peeler Function 1. Uses the peeler function 0. Does not use the peeler function 5 ~ 7bit:Not used ESC i d Specify margin amount (feed amount) ASCII: ESC i d {n1} {n2} Hexadecimal: 1B 69 64 {n1} {n2} Description ⚫ Specifies the amount of the margins. ⚫ Margin amount (dots)=n1+n2*256 ⚫ With die-cut labels, the margin amount at the ends of the printed area is 0. (a) Continuous length tape Paper Tape Print area (b) Die-cut labels Margin amount Cut line Paper Label Print area Margin amount (only "0" is available) Cut line - 30 - 4. Printing Command Details