Brother International TD-2135NWB P-touch Template Manual/ Command Reference - Page 51
^PC Specify print start received character count
View all Brother International TD-2135NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
P-touch Template 2.0 Command Reference ^PC Specify print start received character count ASCII: ^ P C n1 n2 n3 Hexadecimal: 5E 50 43 nh1 nh2 nh3 Parameters 0≤n1≤9 0≤n2≤9 0≤n3≤9 Description Specifies the number of characters to be received in order to start printing. (n1*100)+(n2*10)+n3: Print start received character count (bytes) (1 to 999) The default print start received character count is 10. This command is a dynamic command. If Unicode(UTF-8) mode is used, 1-4 bytes are used as 1 character. Example To change the print start received character count to 100 characters: Since n1=1, n2=0 and n3=0, the command will be as follows. ^ P C 1 0 0 (5Eh 50h 43h 31h 30h 30h) - 44 - 7. P-touch Template Command Details
P-touch Template 2.0 Command Reference
- 44 -
7. P-touch Template Command Details
^PC
Specify print start received character count
ASCII:
^
P
C
n1
n2
n3
Hexadecimal: 5E
50 43 nh1 nh2
nh3
Parameters
0≤
n1
≤9
0≤
n2
≤9
0≤
n3
≤9
Description
Specifies the number of characters to be received in order to start printing.
(n1*100)+(n2*10)+n3:
Print start received character count (bytes) (1 to 999)
The default print start received character count is 10.
This command is a dynamic command.
If Unicode(UTF-8) mode is used, 1-4 bytes are used as 1 character.
Example
To change the print start received character count to 100 characters:
Since n1=1, n2=0 and n3=0, the command will be as follows.
^ P C 1 0 0
(5Eh 50h 43h 31h 30h 30h)