Brother International TD-2135NWB P-touch Template Manual/ Command Reference - Page 59
^FC FNC1 replacement setting
View all Brother International TD-2135NWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
P-touch Template 2.0 Command Reference ^FC FNC1 replacement setting ASCII: ^ F Cn Hexadecimal: 5E 46 43 nh Parameters 0≤n≤1 Description Selects whether or not GS codes, which are included in barcode protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes. n: FNC1 replacement setting (ON: 1; OFF: 0 (default)) This command is a dynamic command. Remarks Invalid if n is a value other than 1 or 0 Example To disable FNC1 replacement: Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows. ^ F C 0 (5Eh 46h 43h 30h) - 52 - 7. P-touch Template Command Details
P-touch Template 2.0 Command Reference
- 52 -
7. P-touch Template Command Details
^FC
FNC1 replacement setting
ASCII:
^
F
C
n
Hexadecimal: 5E
46 43 nh
Parameters
0≤
n
≤1
Description
Selects whether or not GS codes, which are included in barcode protocols such as GS1-128
(UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
This command is a dynamic command.
Remarks
Invalid if n is a value other than 1 or 0
Example
To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows.
^ F C 0
(5Eh 46h 43h 30h)