Brother International TD-4420DN Raster Command Reference - Page 35
CPCL Mode
![]() |
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Raster Command Reference ESC i a Switch dynamic command mode ASCII: ESC Hexadecimal: 1B i a {n1} 69 61 {n1} Parameters Definitions of {n1}: 0: ESC/P mode 1: Raster mode (Be sure to switch to this mode.) 3: P-touch Template mode (default) 4: CPCL Page Mode 5: CPCL Line Mode FF: Mode set as default Description ⚫ Dynamically switches between the printer's command modes. A printer that receives this command operates in the specified command mode until the printer is turned off. ⚫ The printer must be switched to raster mode before raster data is sent to it. Therefore, send this command to switch the printer to raster mode. ESC i ! Switch automatic status notification mode ASCII: ESC Hexadecimal: 1B i ! {n1} 69 21 {n1} Parameters Definitions of {n1} 0: Notify. 1: Do not notify. (default) Description ⚫ Dynamically switches whether the automatic status notification is given during printing. A printer that receives this command operates in the specified command mode until the printer is turned off. ⚫ Use this command when building a system where the status is not obtained. - 29 - 7. Printing Command Details
![](/manual_guide/products/brother-international-td4410d-raster-command-reference-5c01ec6/35.png)