Brother International TD-4420DN Raster Command Reference - Page 38
Die-cut labels: 0Bh
![]() |
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Raster Command Reference ESC i z Print information command ASCII: ESC i z {n1} {n2} {n3} {n4} {n5} {n6} {n7} {n8} {n9} {n10} Hexadecimal: 1B 69 7A {n1} {n2} {n3} {n4} {n5} {n6} {n7} {n8} {n9} {n10} Description ⚫ Specifies the print information. ⚫ Definitions of {n1} through {n10} {n1}: Valid flag; Specifies which values are valid #define PI_KIND 0x02 // Media type #define PI_WIDTH 0x04 // Media width #define PI_LENGTH 0x08 // Media length #define PI_RECOVER 0x80 // Printer recovery always on {n2}: Media type Continuous length tape: 0Ah Die-cut labels: 0Bh {n3}: {n4}: {n3}: Media width (mm) {n4}: Media length (mm) For the media of width 102 mm, specify as n3 = 66h and n4 = 00h. {n5-n8}: Raster number = n8*256*256*256 + n7*256*256 + n6*256 + n5 {n9}: Starting page: 0 Other pages: 1 {n10}: Fixed at 0 ⚫ If the media is not correctly loaded into the printer when the valid flag for PI_KIND, PI_WIDTH and PI_LENGTH are set to "ON", an error status is returned (Bit 0 of "5.2.3 Error information 2" is set to "ON".) - 32 - 7. Printing Command Details
![](/manual_guide/products/brother-international-td4410d-raster-command-reference-5c01ec6/38.png)