Brother International TD-4420DN ESC/ P Command Reference - Page 103
ESC i a Switch command mode, Switches the command mode to ESC/P, P-touch Template
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
ESC/P Command Reference ESC i a Switch command mode ASCII: ESC i a n Decimal: 27 105 97 n Hexadecimal: 1B 69 61 n Parameters n: Command mode 0 or 48: ESC/P standard mode 1 or 49: Raster graphics mode 3 or 51: P-touch Template mode 4 or 52: CPCL Page Print mode 5 or 53 :CPCL Line Print mode Description Switches the command mode to ESC/P, P-touch Template, Raster graphics mode, CPCL Page Print mode and CPCL Line Print mode. Dynamically switches between the five modes. Since this is a dynamic command, after the printer is turned off and on again, the setting returns to the previously setting. Invalid if n is a value outside of the allowable range. - 97 - 5. Control Command Details
ESC/P Command Reference
- 97 -
5. Control Command Details
ESC i a
Switch command mode
ASCII:
ESC
i
a
n
Decimal:
27
105
97
n
Hexadecimal: 1B
69
61
n
Parameters
n:
Command mode
0 or 48: ESC/P standard mode
1 or 49: Raster graphics mode
3 or 51: P-touch Template mode
4 or 52: CPCL Page Print mode
5 or 53 :CPCL Line Print mode
Description
Switches the command mode to ESC/P, P-touch Template, Raster graphics mode, CPCL Page Print mode
and CPCL Line Print mode.
Dynamically switches between the five modes.
Since this is a dynamic command, after the printer is turned off and on again, the setting returns to the
previously setting.
Invalid if n is a value outside of the allowable range.