Brother International TD-4420DN ESC/ P Command Reference - Page 114
ESC iXX2 Specify default character size
View all Brother International TD-4420DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
ESC iXX2 Specify default character size ASCII: ESC i X Decimal: 27 105 88 Hexadecimal: 1B 69 58 X 2 n1 n2 n3 n4 88 50 n1 n2 n3 n4 58 32 n1 n2 n3 n4 Parameters n1: 02h (Fixed) n2: 00h (Fixed) 00h≤n3≤FFh, 00h≤n4≤01h Description Specifies the default character size. n3+(n4*256): Default character size (dots) The following settings (dots) are valid. The maximum valid setting is n=400. *The manufacturer's default is 24. This command is a static command. Remarks Invalid if the setting is a value outside of the allowable range ESC/P Command Reference - 108 - 5. Control Command Details
ESC/P Command Reference
- 108 -
5. Control Command Details
ESC iXX2
Specify default character size
ASCII:
ESC
i
X
X
2
n1
n2
n3
n4
Decimal:
27
105
88
88
50
n1
n2
n3
n4
Hexadecimal: 1B
69
58
58
32
n1
n2
n3
n4
Parameters
n1: 02h (Fixed)
n2: 00h (Fixed)
00h
≤
n3
≤
FFh, 00h
≤
n4
≤
01h
Description
Specifies the default character size.
n3+(n4*256): Default character size (dots)
The following settings (dots) are valid.
The maximum valid setting is n=400.
*The manufacturer’s default is 24.
This command is a static command.
Remarks
Invalid if the setting is a value outside of the allowable range