Brother International TD-4420TN FBPL Command Reference - Page 76

6.17 QRCODE Description Print a QR code. Syntax QRCODE x,y,ECC Level,cell width,mode,rotation,[justification,]model,]mask,]area] "content" Parameter x y ECC level cell width mode rotation [justification] [model] [mask] [area] content Description The upper left corner x-coordinate of the QR code The upper left corner y-coordinate of the QR code Error correction recovery level L : 7% M : 15% Q : 25% H : 30% 1~10 Auto / manual encode A : Auto M : Manual 0 : 0 degree 90 : 90 degree 180 : 180 degree 270 : 270 degree Barcode justification (J1 to J9 valid; See the Sample Code below) M1: (default), original version M2: enhanced version (Almost all smartphone support this version.) S0~S8, default is S7 Maximum size of barcode area (Xdots; e.g. X100) The encodable character set is described as below: Encodable character set: 1) Numeric data: (digits 0~9) 2) Alphanumeric data Digits 0-9 Upper case letters A-Z Nine other characters: space 3) 8-bit byte data JIS 8-bit character set (Latin and Kana) in accordance with JIS X 0201 4) Kanji characters Shift JIS values 8140HEX -9FFCHEX and E040HEX -EAA4 HEX. These are values shifted from those of JIS X 0208. Refer to JIS X 0208 Annex 1 Shift Coded Representation for detail. Data characters per symbol (for maximum symbol size): Model 1 (Version 14-L) Model 2 (Version 40-L) Numeric data 1,167 characters 7,089 characters Alphanumeric data 707 characters 4,296 characters 8-bit byte data 486 characters 2,953 characters Kanji data 299 characters 1,817 characters *If "A" is the first character in the data string, then the following data after "A" is alphanumeric data. *If "N" is the first character in the data string, then the following data after "N" is numeric data. *If "B" is the first character in the data string, then the following 4 digits after "B" is used to specify numbers of data. After the 4 digits is the number of 71