Brother International TD-4520TN FBPL Command Reference - Page 15
AUTODETECT, Description, Syntax, See Also
![]() |
View all Brother International TD-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5.5 AUTODETECT Description Feed the paper through the gap/black mark sensor to determine the paper and gap/black mark sizes, respectively. This command references the user's approximate measurements. If the measurements conflict with the actual size, the AUTODETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts. Syntax AUTODETECT [x,y] Parameter x y Description Paper length (in dots) Gap length (in dots) Note: If the x, y parameters are ignored then the printer will calibrate and determine the paper length and gap/black mark size automatically. The printer will detect the label by the proper sensor type. When using this command, make sure GAP or BLINE command are not used in your program. See Also GAP, SIZE, GAPDETECT, BLINEDETECT 10
![](/manual_guide/products/brother-international-td4420tn-fbpl-command-reference-a4fb318/15.png)