Brother International TD-4520TN FBPL Command Reference - Page 36
LIMITFEED, Description, Syntax, Example
![]() |
View all Brother International TD-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5.23 LIMITFEED Description If the gap sensor is not set to a suitable sensitivity while feeding labels, the printer will not be able to locate the correct position of the gap. This command stops label feeding and makes the red LED flash if the printer does not locate gap after feeding the length of one label plus one preset value. Syntax LIMITFEED n[,minpaper,maxgap] LIMITFEED n mm[,minpaper mm,maxgap mm] LIMITFEED n dot[,minpaper dot,maxgap dot] In inches In mm In dots Parameter N Minpaper Maxgap Description The maximum length for the sensor detection The minimum length of paper The maximum length of gap Note: The setting will remain resident in memory. For metric system, make sure to add a space between parameter n and mm. The default value is 10 inches when the printer is initialized. Example Sample code In inches LIMITFEED 12 31
![](/manual_guide/products/brother-international-td4420tn-fbpl-command-reference-a4fb318/36.png)